Zelda 40th Anniversary Nintendo Switch Game Case

Store and protect your game cartridges with this custom Nintendo Switch case celebrating the 40th Anniversary of The Legend of Zelda, fully compatible with both Nintendo Switch 1 and Nintendo Switch 2 game cards.

3 Versions Available 📦 I have included 3 versions so you can pick the one that best fits your printing setup:

- "Hidden Magnets": The primary version shown in the photos. The print profile features an automatic pause at layer 30 so you can insert the magnets before the printer encapsulates them completely for a seamless, invisible finish.

- "Surface Magnets": For those who prefer pressing or gluing the magnets into place once the print is finished.

- "Snap-Fit" (No Magnets): A 100% 3D-printed mechanical version featuring an integrated snap-latch mechanism to keep the case securely closed.

Required Materials 🧲 (Only for magnetic versions)

- 8x Neodymium magnets (6x2 mm) — one for each corner of the case.

Printing Recommendations ⚠️

- Pause at Layer 30: On the hidden-magnets profile, the print will automatically pause to let you drop the magnets into the slots you can see in the image below.

- Magnet Tolerances: Tolerances are tuned for a snug press fit without requiring glue. If a slot feels slightly tight due to filament expansion, gently warming the magnet or slot with warm air will help it seat smoothly.

- Check Polarity: Double-check magnet orientations before resuming the print (or inserting them on the surface version) to guarantee both halves attract properly when closed.

- Bed Adhesion & Leveling: Ensure your build plate is clean (warm water with dish soap) and properly leveled. Good bed adhesion and zero warping are crucial, as even minor corner lifting will misalign the hinges and magnetic closure.

Troubleshooting & Tolerances 🛠️ This design features fine-tuned tolerances for both the integrated hinge and cartridge slots:

- Hinge Stiffness: If the case feels slightly stiff to close right off the build plate, keep it fully closed under a moderately heavy book for a few hours to let the hinge settle. You can also apply gentle warmth to the spine using a hairdryer while keeping it shut.

- Cartridge Fit: Always test inserting and removing cartridges gently. Filament shrinkage varies across brands and materials; never force a game card into a slot if your printer produces slight overextrusion on internal walls.

Easy to print, practical for everyday carry, and a great commemorative piece for the 40th anniversary of The Legend of Zelda. If you have any questions or feedback, feel free to drop a comment below—I'll be happy to help! 😊

Boost MeIf you enjoy this model and appreciate the effort put into designing and testing it, leaving a Boost means a lot! It directly supports me in designing and sharing more functional models for the community. 📜 Commercial License This model is shared under a Personal Use Only license. If you are interested in selling physical 3D prints of this and my other designs, commercial licensing is available on my Patreon: 👉 https://www.patreon.com/cw/MambaPrintStudio