Articulated Shark
por Javi Rodríguez en Thingiverse
No supports required. Just slice and print!! 4 Versions available: - Shark_v4_A.stl: Original design, movable jaw - Shark_v4_B.stl: Friendly face, movable jaw - Shark_v4_C.stl: Original design, NON-movable jaw - Shark_v4_D.stl: Friendly face, NON-movable jaw Design updated to v4 for a tighter tail..
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Javi Rodríguez.
Archivos (5)
- Categoría
- Juguetes y juegos
- Formatos
- TXT, STL
- Descargas (todas las plataformas)
- 841,574
- Publicado
Sobre este modelo
No supports required. Just slice and print!! 4 Versions available: - Shark_v4_A.stl: Original design, movable jaw - Shark_v4_B.stl: Friendly face, movable jaw - Shark_v4_C.stl: Original design, NON-movable jaw - Shark_v4_D.stl: Friendly face, NON-movable jaw
Design updated to v4 for a tighter tail joint The non-movable versions are intended for children, as teeth are quite sharp. Or just in case you have trouble printing the movable one. Best results if you use a thin layer resolution (0.16 mm works perfect) After printing, the tail and the jaw should get free with a little force: https://youtu.be/14z1ll9yMmU Then just enjoy it, even in the water!! https://youtu.be/E1W-RyH8bGA https://youtu.be/aV-XhMr7Edc Check my other articulated designs HERE! For Commercial License questions, check here
Descripción original del autor, publicada en Thingiverse.
