Yet Another Fidget Infinity Cube v2
por Austin Vojta en Printables
v2 of my fidget cube features easier-to-print joints, more durable construction, and just as much fun!
Licencia
Uso comercial permitidoCC BY-SA 4.0 — Atribución, compartir igual
Puedes usarlo y modificarlo dando crédito; las versiones modificadas deben compartirse con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Austin Vojta.
Archivos (5)
- Categoría
- Juguetes y juegos
- Formatos
- STL, GCODE
- Descargas (todas las plataformas)
- 240,067
- Publicado
También en
Sobre este modelo
Buy a printed fidget cube from me directly: AustinMakes.etsy.com
An addictive fidget toy that you won't be able to set down! Prints in one piece and works right off the print bed. Note: vertical hinges will be stiffest after printing, but break in after a bit of fidgeting! Printing tips - optimized for 0.2mm layer height and a 0.4mm nozzle - 10% infill is plenty, but up to 100% infill increases the weight, which is super satisfying! - part cooling on 100% fan speed (except first layer) - vertical shells on 2+ perimeters for strength - Cura users: disable No Skin in Z Gaps under your Shell settings
Variations - yafic_v2.stl is the original – easy to print & loved by many - yafic_v2_rounded.stl has rounded edges – more difficult to print, but nicer to hold - yafic_v2_rounded_topjointmod.stl has modified top joints – prints better on some (fast) printers - yafic_v2_test.stl is a smaller test file – use it to try out print settings
Descripción original del autor, publicada en Printables.
