Yet Another Fidget Infinity Cube Rounded - Smaller, Stronger and Tighter.
por IsItBrokenYet en Printables
I really like the YAFIC v2 rounded model, but I wanted a smaller size with a few other optimizations.
Licencia
Uso comercial permitidoCC BY-SA 4.0 — Atribución, compartir igual
Puedes usarlo y modificarlo dando crédito; las versiones modificadas deben compartirse con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a IsItBrokenYet.
Archivos (4)
- yafic_v2_rounded_smaller_stronger_tighter_18mm.stl STL · 7,4 MB
- yafic_v2_rounded_smaller_stronger_tighter.3mf 3MF · 1,8 MB
- yafic_v2_rounded_stronger_hinge_0.4n_0.1mm_PLA_Prusa CORE One L HF_4h17m.gcode GCODE · 14,3 MB
- yafic_v2_rounded_stronger_hinge_0.4n_0.1mm_PLA_Prusa CORE One L HF_4h9m.gcode GCODE · 12,6 MB
- Categoría
- Juguetes y juegos
- Formatos
- STL, 3MF, GCODE
- Descargas
- 515
- Publicado
Sobre este modelo
Printing Tips - This model is sized for a 0.1 mm layer height anything more than that will probably fuse. The space between the model and the hinge is a single layer at 0.1 mm.
- If the hinges are sticking an adjustable wrench can provide good leverage at the hinge to free them.
- I'm using Orca Slicer with 3mm Scarf Joints everywhere so the seams don't fuse in the hinges.
- With the rounded edge the second layer has a bit of an overhang. Setting the outer wall width to 0.7mm prevents the unsupported line.
- The vertical hinges will be initially tight, but should loosen up with a few minutes of using the fidget.
- With 99% infill and PLA it weighs about 47g.
Descripción original del autor, publicada en Printables.
