Ultimate Pop Switch Fidget Toy V3
por AbyssalCactus en MakerWorld
This Ultimate Pop Switch Fidget Toy V3 is a pocket-sized pop switch fidget built around a two-button rocker with a sharp, repeatable click. Press one button down and the lever rocks on its center pivot, driving the opposite button up in the same motion, so you can run it back and forth as fast…
MakerWorld entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalStandard Digital File License
Licencia estándar de archivos digitales: solo uso personal. No se permite compartir, revender ni subir el archivo a otros sitios, ni vender las impresiones.
Al descargar aceptas respetar la licencia y dar crédito a AbyssalCactus.
Archivos (2)
- Ultimate Pop Switch Fidget Toy V3.3mf 3MF · 281 KB
- V3 Ultimate Pop Switch Fidget Clicker v22.stl STL · 1,2 MB
- Categoría
- Juguetes y juegos
- Formatos
- 3MF, STL
- Descargas
- 368
- Publicado
Sobre este modelo
This Ultimate Pop Switch Fidget Toy V3 is a pocket-sized pop switch fidget built around a two-button rocker with a sharp, repeatable click. Press one button down and the lever rocks on its center pivot, driving the opposite button up in the same motion, so you can run it back and forth as fast as your thumb moves. The buttons are attached directly to the lever instead of resting on it, which holds them in position no matter how you hold the toy, whether sideways, upside down, or shaken in your pocket. Behind the lever, a serpentine spring compresses and releases through every press, loading up resistance before letting go in a clean, mechanical click. The spring, lever, and button linkages were carefully prototyped so the throw and the click feel identical in both directions. Everything slides together by hand and the lid clips on, with no glue and no hardware required. Ribbed edges wrap the sides for grip, recessed panels break up the face, and the window and vent ring let you watch the spring and pivot work as you click. The Ultimate Pop Switch Fidget Toy V3 is the perfect print for anyone who loves a good fidget and a clever mechanism. Boost MeIf you like this model, please consider boosting it! It helps out a ton :)MembershipWant to sell my 3D printed fidget toys? Become part of my Commercial License Membership program!Printing Instructions:
- Prepare the Print Bed - Clean the print bed thoroughly with isopropyl alcohol to ensure proper adhesion.
- Additional adhesive for the print bed is highly recommended! I suggest using 3D-Lac spray or a glue stick.
- Download the Print Profile - Send the pre-configured print profile to your Bambu Lab printer through the Bambu Handy app or Download and open the pre-configured print profile in Bambu Studio.
- Select Your Printing Options - Choose your filament type and color.
- Select your print bed type (e.g., textured or smooth).
- Confirm your printer settings, ideally for a Bambu Lab printer.
- Start Printing - Begin the print job. No supports are necessary.
Descripción original del autor, publicada en MakerWorld.
