Ultimate Flip & Slide Fidget Toy (Print in Place)

Ultimate Flip & Slide Fidget Toy is a two-disc fidget toy that flips, folds, and slides in your hand with a tactile sound and feel every time the discs land. The mechanism is a two-part hinge where each piece can rotate on its own, and each disc is attached to its half of the hinge with a second joint. Together the two joints let the discs swing, slide, and flip on top of each other, and every landing gives you the same sound and feel. Every joint was carefully prototyped to dial in the motion. It’s fully print-in-place, so it comes off the build plate ready to use with zero assembly and no supports. Concentric ring grooves on each face give your thumb something to trace, and a ring of dimples around the edge gives you a solid grip while you flip. The Ultimate Flip & Slide Fidget Toy is the perfect print for anyone who loves a good fidget and a clever hinge mechanism. Boost MeIf you like this model, please consider boosting it! It helps out a ton :)MembershipWant to sell my 3D printed fidget toys? Become part of my Commercial License Membership program!Printing Instructions:

- Prepare the Print Bed - Clean the print bed thoroughly with isopropyl alcohol to ensure proper adhesion.

- Additional adhesive for the print bed is highly recommended! I suggest using 3D-Lac spray or a glue stick.

- Download the Print Profile - Send the pre-configured print profile to your Bambu Lab printer through the Bambu Handy app or Download and open the pre-configured print profile in Bambu Studio.

- Select Your Printing Options - Choose your filament type and color.

- Select your print bed type (e.g., textured or smooth).

- Confirm your printer settings, ideally for a Bambu Lab printer.

- Start Printing - Begin the print job. No supports are necessary.