Tray Inserts for Dungeon Master Tome - RPG Organizer
Update August 12, 2024: Added some inserts that I had designed as a part of a personal project. Card Insert2 was created to prevent D6 and D4 dice from falling in the middle chamber.
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Revisa las condicionesModel License 10-2025
El autor usa su propia licencia. Revisa sus condiciones en la página original antes de compartir, modificar o vender.
Al descargar aceptas respetar la licencia y dar crédito a Eric P.
Archivos (58)
- Dice Insert_1x6x1.stl STL · 569 KB
- Cut Dice Insert_1x6x1.stl STL · 597 KB
- Cut Insert_1x6x1_No Dividers.stl STL · 129 KB
- Cut Insert_4x3x1_2 Compartments.stl STL · 207 KB
- Cut Insert_4x3x1_No Dividers.stl STL · 101 KB
- Cut Insert_4x3x2_2 Compartments.stl STL · 435 KB
- Cut Insert_4x3x2_No Dividers.stl STL · 223 KB
- Cut Insert_4x6x1_No Dividers.stl STL · 129 KB
- Cut Insert_4x7x1_No Dividers.stl STL · 129 KB
- Cut Insert_5x1x1_No Dividers.stl STL · 129 KB
- Cut Insert_5x2x1_4 Compartments.stl STL · 445 KB
- Cut Insert_5x2x1_No Dividers.stl STL · 129 KB
- Cut Insert_5x3x1_3 Compartments.stl STL · 320 KB
- Cut Insert_5x3x1_No Dividers.stl STL · 129 KB
- Cut Insert_5x4x1_2 Compartments.stl STL · 234 KB
- Cut Insert_5x4x1_No Dividers.stl STL · 129 KB
- Cut Insert_5x5x1_No Dividers.stl STL · 129 KB
- Cut Insert_5x7x1_No Dividers.stl STL · 129 KB
- Insert_1x7x1_No Dividers.stl STL · 133 KB
- Insert_4x3x1_2 Compartments.stl STL · 239 KB
- Insert_4x3x1_No Dividers.stl STL · 133 KB
- Insert_4x3x2_2 Compartments.stl STL · 462 KB
- Insert_4x3x2_No Dividers.stl STL · 250 KB
- Insert_4x6x1_No Dividers.stl STL · 133 KB
- Insert_4x7x1_No Dividers.stl STL · 133 KB
- Insert_5x1x1_No Dividers.stl STL · 133 KB
- Insert_5x2x1_4 Compartments.stl STL · 449 KB
- Insert_5x2x1_No Dividers.stl STL · 133 KB
- Insert_5x3x1_3 Compartments.stl STL · 318 KB
- Insert_5x3x1_No Dividers.stl STL · 133 KB
- Insert_5x4x1_2 Compartments.stl STL · 239 KB
- Insert_5x4x1_No Dividers.stl STL · 133 KB
- Insert_5x5x1_No Dividers.stl STL · 133 KB
- Insert_5x6x1_No Dividers.stl STL · 133 KB
- Insert_5x7x1_No Dividers.stl STL · 133 KB
- Insert_1x6x1_No Dividers.stl STL · 133 KB
- Cut Dice Insert_1x6x1.step STEP · 344 KB
- Cut Insert_1x6x1_No Dividers.step STEP · 98 KB
- Cut Insert_5x1x1_No Dividers.step STEP · 96 KB
- Dice Insert_1x6x1.step STEP · 193 KB
- Insert_1x6x1_No Dividers.step STEP · 63 KB
- Insert_5x1x1_No Dividers.step STEP · 62 KB
- Insert_5x7x1_No Dividers.step STEP · 61 KB
- Insert_4x1x1_No Dividers.stl STL · 134 KB
- Card Insert2.stl STL · 315 KB
- Custom_Insert2.stl STL · 242 KB
- Custom_Insert1.stl STL · 269 KB
- Card Insert.stl STL · 269 KB
- Cut_Insert_1x7x1_No Dividers.stl STL · 119 KB
- Insert_4x2x1_No Dividers.stl STL · 132 KB
- Insert_4x3x1_6 Compartments.stl STL · 871 KB
- Insert_4x2x1_3 Compartments.stl STL · 343 KB
- Cut_Insert_1x5x1_No Dividers.stl STL · 128 KB
- Cut_Insert_1x3x1_No Dividers.stl STL · 142 KB
- Cut_Insert_3x1x1_No Dividers.stl STL · 142 KB
- Cut_Insert_1x4x1_No Dividers.stl STL · 128 KB
- Insert_1x4x1_No Dividers.stl STL · 130 KB
- Insert_3x1x1_No Dividers.stl STL · 133 KB
- Categoría
- Juguetes y juegos
- Formatos
- STL, STEP
- Descargas
- 620
- Publicado
Sobre este modelo
Update August 12, 2024: Added some inserts that I had designed as a part of a personal project. Card Insert2 was created to prevent D6 and D4 dice from falling in the middle chamber.
The inserts provided here are sized for the Dungeon Master Tome (https://than.gs/m/1116436) I designed.
Feel free to remix your own inserts to fit my tome.
The dimensions specified in each insert is in "units". Each unit is 30.5x30.5x25.2mm (Not including tolerances).
So if I wanted to make an insert that is 3x5x2, then, incorporating a 0.2mm tolerance on each side, the dimensions would be: (((30.5 * 3) - 0.4) by ((30.5 * 5) - 0.4) by ((25.2 * 2) - 0.4))mm
The "Cut" inserts were designed to fit on the top row of the tome. Because of the way the tome closes, clearance had to be made for the lid. So if you know your insert is going to be at the far end of the tome, you'll want to add a similar cut.
The dimensions of my cuts are 13.4mm from the edge and the angle is at a 45 degree angle.
There should be no problem scaling these if you find the fitment to be a little tight.
Feel free to join my discord (https://discord.gg/tdxE35eZwF) for additional support, questions, or suggestions!
Descripción original del autor, publicada en Thangs.
