Tombstone with Flying Ghosts Fidget Spinner (2 sizes)

👻 Who says tombstones can't be fun? This little ghost has some grave moves! 🌀

My Tombstone with Flying Ghost Fidget Spinner is the perfect spooky-season fidget — give either ghost a flick and watch'em whirl around the tombstone. It comes in two sizes (large and small) 👍🏼

**Important**: Each fidget spinner needs 3 ball bearings. The Large Tombstone uses size 608ZZ and the Small Tombstone uses size 626ZZ.

**Here are links for purchasing the Ball Bearings**: Amazon link (for both sizes) 👉 https://amzn.to/3U2RO77

Bambu Lab links: Large bearings (608ZZ) 👉 https://us.store.bambulab.com/products/micro-steel-deep-groove-ball-bearings?id=42504745025672 Small bearings (626ZZ) 👉 https://us.store.bambulab.com/products/micro-steel-deep-groove-ball-bearings?id=42504744796296

**Dimensions**: Large Tombstone: 3 in. tall x 3.75 in. (width of ghosts) Small Tombstone: 2.6 in. tall x 3.25 in. (width of ghosts)

**3D Printing Instructions**: PLA works great 0.2 mm Layer Height 15% Infill No supports needed

**Specifics of 3mf project profile**: Print Plate #1 (Large ghosts' parts): 2 colors, wall loops 3, bottom shell layers 6 Print Plate #2 (Large tombstone parts): 1 color, 0.15 elephant foot compensation for the Tombstone_top piece Print Plate #3 (Small ghosts' parts): 2 colors, wall loops 3, bottom shell layers 6 Print Plate #4 (Small tombstone parts): 1 color, 0.15 elephant foot compensation for the Tombstone_top piece

How to Assemble the Large Tombstone & Ghosts (also see photo): - Place one 608ZZ ball bearing in the center of the double ghost piece - Place another 608ZZ ball bearing in each ghost - Cover each ghost with a ghost cover piece (i.e. Large_left ghost and Large_right ghost) - Place this assembled double ghost part onto the post of the Large_tombstone bottom piece - Add the Large_washer onto the post - Attach the Tombstone_top piece (If needed use superglue while assembling for a more secure fit)

How to Assemble the Small Tombstone & Ghosts (also see photo): - Place one 626ZZ ball bearing in the center of the double ghost piece - Place another 626ZZ ball bearing in each ghost - Cover each ghost with a ghost cover piece (i.e. Small_left ghost and Small_right ghost) - Place this assembled double ghost part onto the post of the Small_tombstone bottom piece - Add the Small_washer onto the post - Attach the Small_tombstone_top piece (If needed use superglue while assembling for a more secure fit)

I really hope you enjoy printing the model!! 👻 Erin