The Legend of Zelda: Breath of the Wild Treasure Chest Switch Cartridge holder

This is an MMU print of the treasure chest from Breath of the Wild. It's printed in several parts for the best quality but that does mean some assembly required. A little bit of super glue is all you need but most of the parts can just snap togeather. Assembly instructions: I've provided the 3mf file with everything already set up so you should be able to just slice and print. Lid Top.stl and Lid Bottom.stl go togeather. You'll see grooves at the bottom where the two can interlock. Glue as neccesary. Hinge bars.stl are used to join the lid and bottom of the chest together. No glue neccesary, it should be a snug friction fit. Note that the bars are tapered and meant to go in from one direction. Same is true for the Chest Legs.stl which can just be press-fitted into the bottom of the chest. The Latch.stl will need to be glued onto the Lid Bottom.stl. Make sure you have the right orientation so maybe attach the handle onto the latch first. The handle should just kinda snap in place. The latch clicks in very satisfyingly UPDATE: The handle now has little stoppers that prevent it from slipping around so much. It is much better now UPDATE 2: I have added each part of the chest as STLs now. Note that they are just object files and do not have MMU painting. You will need to paint them yourselves. Take advantage of the smart fill brush.