TCG Basic Magnet Case / no supports / 3mf included

Keep your precious TCG decks fully protected with the TCG Basic Magnet Case! This functional deck box is engineered specifically for card game players (Magic: The Gathering, Pokémon TCG, Star Wars: Unlimited, Disney Lorcana, Yu-Gi-Oh!, Flesh and Blood, and more).

Building upon our classic deck box geometry, this version introduces an upgraded hybrid closure system. In addition to internal mechanical lips that snap shut, it features two embedded 10x1 mm neodymium magnets at the front latch. This ensures that even after extensive opening and closing cycles over time, the magnets maintain an active, reliable lock to keep your cards safe!

The model is meticulously engineered to print completely 100% support-free, featuring a smooth print-in-place rear hinge. While supports are completely optional under the hinge area, extensive testing confirms it prints flawlessly with zero support structures!

✨ Features:

Hybrid Long-Lasting Closure: Combines mechanical friction tabs with two 10x1 mm front magnets to prevent wear-and-tear degradation over extended use.

Print-in-Place Hinge: Robust interlocking rear hinge engineered directly into the box geometry for seamless movement right off the build plate.

Universal TCG Compatibility: Designed with optimal clearance for single-sleeved and double-sleeved standard cards across all major trading card games.

100% Support-Free: Smart layout that prints smoothly directly on the build plate with zero structural waste (supports under the hinge are entirely optional!).

Files Included: High-resolution STL files and pre-calibrated, ready-to-slice 3MF project files.

All Markus3D designs are Copyrighted and for PERSONAL USE ONLY. To sell prints of my models, you can subscribe to my Patreon or Thangs with the commercial tier membership. Digital files can’t be shared or resold!

➡️Patreon Markus3d (https://www.patreon.com/c/Markus3D)

➡️Thangs Markus3D (https://thangs.com/designer/Markus3D/memberships)

➡️You are welcome to follow my socials, check all my links or contact me here! (linktr.ee/Markus3d)

------------------------

🔧 Recommended 3D Printing Settings:

🖨️ Layer height: 0.2 mm 🖖 Walls / Perimeters: 3 (Highly recommended for durable hinges and rigid walls) 🔄 Infill: 15% (Gyroid or Grid work perfectly) 🚫 Supports: No (Optional under the hinge, but prints cleanly without them) 🧲 Hardware needed: 2 pieces of 10x1 mm round neodymium magnets.