T-47 Snowspeeder - FREE Star Wars Kit | No Supports, No AMS, No Glue
Time to take down some walkers! This kit is roughly 8 inches (20cm) long with a 7 inch (18cm) wingspan. There is also included a 50% scaled version in the files that you can use to display with your AT-AT kit (https://thangs.com/designer/The%20Kit%20Kiln/3d-model/AT-AT%20Kit%20%28No%20Support%2C%20N
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Revisa las condicionesThe Kit Kiln Copyright
El autor usa su propia licencia. Revisa sus condiciones en la página original antes de compartir, modificar o vender.
Al descargar aceptas respetar la licencia y dar crédito a Jacob C.
Archivos (14)
- Ash Grey.stl STL · 8,6 MB
- Charcoal Black.stl STL · 63 KB
- Fossil Grey.stl STL · 7 KB
- Muted Red.stl STL · 57 KB
- Muted White.stl STL · 50,4 MB
- Half Size - Ash Grey.stl STL · 7,9 MB
- Half Size - Charcoal Black.stl STL · 59 KB
- Half Size - Fossil Grey.stl STL · 5 KB
- Half Size - Muted Red.stl STL · 57 KB
- Half Size - Muted White.stl STL · 50,0 MB
- T-47 Full Size 3MF (For Bambu Printers).3mf 3MF · 14,7 MB
- T-47 Half Size 3MF (For Bambu Printers).3mf 3MF · 14,3 MB
- Kit Kiln Print Settings.png PNG
- T-47 Snowspeeder Instructions.pdf PDF
- Categoría
- Juguetes y juegos
- Formatos
- STL, 3MF, PNG, PDF
- Descargas
- 4,431
- Publicado
Sobre este modelo
Time to take down some walkers! This kit is roughly 8 inches (20cm) long with a 7 inch (18cm) wingspan. There is also included a 50% scaled version in the files that you can use to display with your AT-AT kit (https://thangs.com/designer/The%20Kit%20Kiln/3d-model/AT-AT%20Kit%20%28No%20Support%2C%20No%20AMS%2C%20No%20Glue%29-1405144)! ___ Want your print to look just like ours? Shop the filament we used on the Polymaker Website (https://shop.polymaker.com/THEKITKILN)
Matte PLA Colors Used: (https://shop.polymaker.com/THEKITKILN?q=panchroma-matte) - Muted White - Ash Grey - Muted Red - Fossil Grey - Charcoal Black
Purchases made through these links help support The Kit Kiln and future designs. ___ As with all of our models, this prints with no supports, assembles with no glue, and doesn't require a multi-material 3D printer! Assembly instructions are included in the download with the files, and the print settings are listed in the photos above. ___ Come join our growing discord community (https://discord.gg/vMKRxGFbwg) to engage with other makers, give feedback, and make requests for future models!
Descripción original del autor, publicada en Thangs.
