Sharn, City of Towers

Sharn, City of Towers This is a recreation of FaelFaron's excellent 3d model of Sharn, using the same maps for lower, middle and upper sharn. I started working on this simply wanting to add the Cogs to the model, but ended up redoing the entire thing with numerous changes. Here's a non-exhaustive list of things I changed: - New terrain - Added cogs & skyway - Added buildings to cliffside and city of the dead - Added bridges between buildings - Added train line pylons - Adjusted building heights

I did not use AI to do anything here, this is all my own work. Printing Guide I printed this on a Bambu A1 mini at 60% scale with a .4mm nozzle, apart from the skyway which was printed on a .2mm nozzle. I did some calibration, but otherwise used default settings. A few of these models definitely need to be printed with supports. After printing, the models took some post-processing. I mostly used a hobby knife and some sandpaper. The different levels of sharn fit together way better after post-processing. Future Improvements In case anyone wants to improve upon my work, here are the things I would do to: - Make middle/upper printable without supports, gluing in the pegs is a better approach - Integrate cogs into terrain, rather than being a separate piece - Adjust measurements of city for accuracy - the heights of each level are easily adjusted

I've included the blender file for easy modification.