Rubber Band Plane
por Brawlybanana327 en Printables
A rubber band plane toy that is launched from the edge of a table.
Licencia
Uso comercial permitidoPuedes imprimirlo, modificarlo y venderlo dando crédito al autor.
Al descargar aceptas respetar la licencia y dar crédito a Brawlybanana327.
- Categoría
- Juguetes y juegos
- Formatos
- STL
- Descargas
- 15,796
- Publicado
Sobre este modelo
Instructions: Print flat on build plate at 0.2mm. No supports/brims needed Let build plate cool sufficiently before removing from bed. To assemble: - Flip it so that the protrusions face down - Bend the vertical stabilizers up
3. Adjust the elevators as needed
4. Heat up the thicker part of the propellers bend 45 degrees
5. Insert the hook of propellers into hole on body
6. Hook on the rubber band Optional: Bend the wings up for better flight Apply WD40 or any lubricants onto the contact points of the hole and hook for less friction
To use: Turn the propellers sufficiently Hold on the the propellers and place the plane on the edge of a table Make sure the 2 hooks are on the edge Let go of the plane and propellers to let it fly!
Took inspiration from: https://www.printables.com/model/430012-ultralight-2gram-glider-print-in-place and https://www.printables.com/model/35485-flying-surprise-butterfly-toy-powered-by-rubber-ba
Descripción original del autor, publicada en Printables.
