Poly Controller with smaller frets (90%) and brass inserts
por Adithya Manjunath en Printables
Improved upon Josh's original design. It has smaller frets (90%), MX style switch support and strap mounts.
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Adithya Manjunath.
Archivos (22)
- MXStem.stl STL · 43 KB
- Poly_Body2.stl STL · 141 KB
- Poly_FretsBottom_NOPCB.stl STL · 443 KB
- Poly_FretsTop.stl STL · 180 KB
- Poly_Headstock.stl STL · 17 KB
- Poly_Neck.stl STL · 113 KB
- Poly_Panel.stl STL · 35 KB
- Poly_PanelSide.stl STL · 49 KB
- Poly_Select.stl STL · 30 KB
- Poly_Start.stl STL · 30 KB
- Poly_Strummer.stl STL · 24 KB
- poly-body1-whammy-pico.stl STL · 919 KB
- poly-potentiometer.stl STL · 73 KB
- poly-screw-mount.stl STL · 68 KB
- poly-slim-whammy.stl STL · 140 KB
- poly-spring-mount.stl STL · 59 KB
- poly-wham-cover.stl STL · 38 KB
- strap-knob.stl STL · 143 KB
- WhammyCover.stl STL · 84 KB
- Poly_Fret_No_Line.stl STL · 56 KB
- Poly_Fret_Line.stl STL · 82 KB
- PolyGuitarHero-heat-set-insert-guide.pdf PDF · 135 KB
- Categoría
- Juguetes y juegos
- Formatos
- STL, PDF
- Descargas
- 0
- Publicado
Sobre este modelo
It keeps the angular, open-frame body of Josh Designs’ Poly controller and builds on the Whammy Edition with changes to the frets, neck, and hardware. We made the five frets 10% smaller and spaced them 10% closer together for a shorter reach. Each fret now uses a two-piece cap and stem designed for TTC low-profile MX-style switches. We also smoothed the underside of the neck, added two strap mounts, and replaced captured nuts at the serviceable joints with M3 brass heat-set inserts for repeated disassembly. A four-screw rear hatch gives the whammy spring clearance and lets you reach it without splitting the guitar body. See the PDF assembly guide for instructions on where and how to install the brass heat-set inserts. Design credits - Poly Clone Hero Controller by Josh Designs
- Poly Clone Hero Controller – Whammy Edition
- Les Paul Controller for Guitar Hero, Clone Hero, and YARG
Descripción original del autor, publicada en Printables.
