Lockpick Puzzle 10
Twist and turn the handle on this lock to solve the maze hidden inside. My Lockpick puzzles are the result of my goal of creating a print-in-place puzzle that comes off the print bed ready to solve!
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Devin B.
Archivos (3)
- key-separated.stl STL · 876 KB
- lockpick-10-separated.stl STL · 749 KB
- lockpick-10.stl STL · 1,6 MB
- Categoría
- Juguetes y juegos
- Formatos
- STL
- Descargas (todas las plataformas)
- 935
- Publicado
Sobre este modelo
Twist and turn the handle on this lock to solve the maze hidden inside. My Lockpick puzzles are the result of my goal of creating a print-in-place puzzle that comes off the print bed ready to solve!
This is puzzle number 10 of 10. I tried to make it so the puzzles become increasingly difficult through the series, although they're all still on the easier side. If there's enough demand I can continue and make things more difficult :)
For ideal results, print at 0.15mm layer height. Other layer heights may make it difficult to snap the handle and lock apart. 2-3 shells and 5-10% infill should be fine. No supports. You can increase shell count if you're worried about the inner rod breaking, but I had no problems.
Model pictured in Fillamentum Vertigo Galaxy PLA (http://bit.ly/VGalaxy) and Extrafill Ruby Red PLA (https://bit.ly/xtrafill)
I've added separated parts in case your printer can't manage the assembled version. The key will require supports!
Descripción original del autor, publicada en Thangs.
