Lockpick Puzzle 03
Twist and turn the handle on this lock to solve the maze hidden inside. My Lockpick puzzles are the result of my goal of creating a print-in-place puzzle that comes off the print bed ready to solve!
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Devin B.
Archivos (3)
- lockpick-03-separated.stl STL · 532 KB
- lockpick-03.stl STL · 1,3 MB
- skey-separated.stl STL · 808 KB
- Categoría
- Juguetes y juegos
- Formatos
- STL
- Descargas (todas las plataformas)
- 338
- Publicado
También en
Sobre este modelo
Twist and turn the handle on this lock to solve the maze hidden inside. My Lockpick puzzles are the result of my goal of creating a print-in-place puzzle that comes off the print bed ready to solve!
This is puzzle number 3 of 10. I tried to make it so the puzzles become increasingly difficult through the series, although they're all still on the easier side. If there's enough demand I can continue and make things more difficult :)
For ideal results, print at 0.15mm layer height. Other layer heights may make it difficult to snap the handle and lock apart. 2-3 shells and 5-10% infill should be fine. No supports. You can increase shell count if you're worried about the inner rod breaking, but I had no problems.
Model pictured in MatterHackers Yellow PRO PLA (https://bit.ly/PRO-PLA)
Descripción original del autor, publicada en Thangs.
