Little Bones Flexi Skeleton

Meet Little Bones 💀 A spooky little skeleton with a big head and 10 moving joints! Print it in one piece, gently free the joints, and give it some personality. A friendly wave, a silly dance, or a relaxed pose — this little desk buddy is always ready for something new. ✨ FEATURES • 10 moving joints • Print-in-place — no assembly required • No glue, screws, or extra hardware • Single-color print — no AMS needed • Designed to print without supports • Approximately 100 mm tall in the original printing pose • Flat back with sculpted details on the front 🦴 MOVING JOINTS The neck, waist, shoulders, hips, knees, one wrist, and one elbow can rotate sideways. Arrange your skeleton flat on your desk or enjoy it as a small fidget. The joints move in the plane of the model. Little Bones is not designed to stand unsupported. 🖨 SUGGESTED PRINT SETTINGS • 0.4 mm nozzle • 0.20 mm layer height • 3 walls • 15% gyroid infill • 4 top and 4 bottom layers • Supports OFF • Flat back facing the build plate Keep all parts in their supplied positions and print at the original scale. Reducing the size also reduces the joint clearances. 💀 AFTER PRINTING Let the build plate cool before removing the model. Support each joint close to its pivot and gently rotate it sideways to release it. Move one joint at a time and avoid forcing it beyond its natural range. 📸 Share a photo of your Little Bones — I’d love to see its funniest pose! Designed for a little spooky fun. 3Dwake