Lion and Lioness (Personal Use)
por Sassiecat3d en Thangs
The Lion and Lioness flexies! 🦁✨
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Revisa las condicionesPersonal licence
El autor usa su propia licencia. Revisa sus condiciones en la página original antes de compartir, modificar o vender.
Al descargar aceptas respetar la licencia y dar crédito a Sassiecat3d.
Archivos (5)
- lion_v2.stl STL · 43,2 MB
- lion_v2_color.3mf 3MF · 12,3 MB
- lion_v2_color_both.3mf 3MF · 24,6 MB
- lioness_v2.stl STL · 43,4 MB
- lioness_v2_color.3mf 3MF · 12,3 MB
- Categoría
- Juguetes y juegos
- Formatos
- STL, 3MF
- Descargas
- 262
- Publicado
Sobre este modelo
The Lion and Lioness flexies! 🦁✨
We wanted to give something back to this fantastic community, so these are free for personal use. (Please read the personal licence)
As someone who grew up watching The Lion King in theaters (yes, the original one!), I still remember the magic of it like it was yesterday. It remains one of my all-time favorite animated films.
While I didn’t want these to be Simba and Nala lookalikes, the inspiration has been simmering in my mind for ages. And now, I’ve finally brought that vision to life!
These print beautifully down to 60%, though they might need a little wiggle or two fresh off the print bed—depending on your settings. Enjoy bringing them to life!
***
Important when downloading/buying the design:
This is my design and copyright to sassiecat3d, it's not to be used commercially or resold/remixed without my permission.
The STL/3mf files are under the same clause, not to be re-sold/remixed or use commercially without my permission.
You are welcome to contact me if you would like to know more on [email protected]
You agree to these terms when you download this file.
***
3D PRINTING SETTINGS: I used a .4mm nozzle, .2mm layer height, I use 5% infill. Make sure your printer is all set with a good calibration and retraction before printing it.
Descripción original del autor, publicada en Thangs.
