LEGO F1 Speed Champions Car Wall Mount (Renter Friendly)
por Viren en Printables
Wall mount for your LEGO F1 Speed Champions cars! Designed to be minimally visible.
Licencia
Solo uso personalCC BY-NC 4.0 — Atribución, no comercial
Puedes imprimirlo y modificarlo para uso personal dando crédito. No se permite vender las impresiones.
Al descargar aceptas respetar la licencia y dar crédito a Viren.
Archivos (6)
- Wall Mount (for adhesive).stl STL · 1,4 MB
- Wall Mount (for screws).stl STL · 1,8 MB
- 1x Wall Mount (for screws)_0.3mm_PETG_MK3S_30m.gcode GCODE · 628 KB
- 1x Wall Mount (for adhesive)_0.3mm_PETG_MK3S_29m.gcode GCODE · 460 KB
- 10x Wall Mount (for adhesive)_0.3mm_PETG_MK3S_4h17m.gcode GCODE · 4,1 MB
- 10x Wall Mount (for screws)_0.3mm_PETG_MK3S_4h31m.gcode GCODE · 5,7 MB
- Categoría
- Juguetes y juegos
- Formatos
- STL, GCODE
- Descargas
- 4,056
- Publicado
Sobre este modelo
This is a wall mount designed for LEGO F1 Speed Champions sets. The most popular commercially available mount for these sets (which this model was inspired by) requires the use of screws, which is not always an option for renters or if you just want flexibility with how you wall-mount these sets. I used double-sided removable adhesive strips with this mount, but you can also use standard #8 wood screws if you prefer. Command brand adhesive strips work great. Just make sure to keep the tab below the mount so you can remove the adhesive strips (see pictures for reference). Suggested Print Settings: - Layer Height: 0.3mm - Perimeters: 4 - Infill: 15% Gyroid - All other settings standard
GCode files available for the Prusa i3 MK3/S/S+ in quantities of 1 and 10 for both adhesive and screw mounting options.
Descripción original del autor, publicada en Printables.
