Hextraction Wave Tile (PLA Bearingless Sozu)
~~The holy grail automatic double dispenser~~. Watch the video to see it in action.
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalSin licencia indicada
El autor no indicó una licencia: todos los derechos le pertenecen. Úsalo solo para imprimir en casa y consulta al autor para cualquier otro uso.
Al descargar aceptas respetar la licencia y dar crédito a NoStep.
Archivos (6)
- Wave Base Left.STL STL · 104 KB
- Wave Base Right.STL STL · 104 KB
- Wave Flipper Left 3-8in.STL STL · 117 KB
- Wave Flipper Left 10mm.STL STL · 113 KB
- Wave Flipper Right 3-8in.STL STL · 117 KB
- Wave Flipper Right 10mm.STL STL · 113 KB
- Categoría
- Juguetes y juegos
- Formatos
- STL
- Descargas
- 360
- Publicado
Sobre este modelo
~~The holy grail automatic double dispenser~~. Watch the video to see it in action. The most reliable double dispenser is now the Neo Sozu (https://than.gs/m/1561313)! I recommend printing that instead.
Hardware / Printing - One M3x12 screw (or longer) - Two M3 washers - PLA, 2 walls, 10% infill, no supports - 10mm and 3/8" flippers available
Assembly 1. Press a 10mm or 3/8" ball into the flipper depending on the flipper you print. May have to use a tool or step on the flipper to fully insert it. Don't damage your floor please! 2. Insert an M3x12 screw into the flipper, stack 2 washers on the screw, then install the flipper. Crank it down until it stops rotating freely. 3. Slowly back out the main screw 1/8th of a turn. Repeat until the flipper freely rotates.
This tile is part of my _Counterweight Dispensers Pack_. Check the others out. - 180zu https://than.gs/m/1327652 - AltWave https://than.gs/m/1031259 - Anchor https://than.gs/m/1288074 - K-zu https://than.gs/m/1288115 - Overdrive Wave https://than.gs/m/1031248 - Wave https://than.gs/m/1031247 - Sailboat https://than.gs/m/1288126 - Tsunami https://than.gs/m/1031250 - Twozu https://than.gs/m/975596
Descripción original del autor, publicada en Thangs.
