Heart spinny fidget toy ornament for Valentine's Day, Christmas, etc.
por thiebes en Printables
Heart fidget toy or ornament/decoration with loop for hanging. Print-in-place, no supports needed.
Licencia
Uso comercial permitidoPuedes imprimirlo, modificarlo y venderlo dando crédito al autor.
Al descargar aceptas respetar la licencia y dar crédito a thiebes.
Archivos (8)
- heart_toy_with_loop.3mf 3MF · 274 KB
- heart_toy_no_loop.3mf 3MF · 243 KB
- heart_fidget_toy_with_loop_small.3mf 3MF · 187 KB
- heart_fidget_toy_no_loop_small.3mf 3MF · 162 KB
- heart_toy_with_loop_0.2mm_PLA_MK3S_1h27m.gcode GCODE · 2,7 MB
- heart_toy_no_loop_0.2mm_PLA_MK3S_1h24m.gcode GCODE · 2,6 MB
- heart_fidget_toy_no_loop_small_0.2mm_PLA_MK3S_16m.gcode GCODE · 799 KB
- heart_fidget_toy_with_loop_small_0.2mm_PLA_MK3S_16m.gcode GCODE · 831 KB
- Categoría
- Juguetes y juegos
- Formatos
- 3MF, GCODE
- Descargas
- 4,208
- Publicado
Sobre este modelo
Nested hearts print in place with no supports for a rotating fidget toy or hanging decoration. Choose with or without a loop for hanging. You can also pop the hearts out and replace them with different colors, by squeezing the outer heart and turning the inner one a bit. Doing this you could make a rainbow version or any color combination that you have filament for.
Most filaments and settings should work. Photos shown were printed with: - PLA - 0.4 mm nozzle - 0.2 mm layers - 15% infill, gyroid - No supports
This design was inspired by Rotating Rings Toy. Change log: - 2023-03-26: Added a small version, about half the size of the original.
Descripción original del autor, publicada en Printables.
