Golf GTI mk1 Simple model - kit card
por P-atix en Printables
Kit card
Licencia
Uso comercial permitidoCC BY-SA 4.0 — Atribución, compartir igual
Puedes usarlo y modificarlo dando crédito; las versiones modificadas deben compartirse con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a P-atix.
Archivos (16)
- 00_setup.stl STL · 3,8 MB
- 01_wheels.stl STL · 808 KB
- 02_chassis.stl STL · 665 KB
- 03_front.stl STL · 70 KB
- 04_back.stl STL · 89 KB
- 05_body.stl STL · 894 KB
- 06_hood.stl STL · 410 KB
- 07_seat.stl STL · 273 KB
- 08_dashboard.stl STL · 291 KB
- 09_steering.stl STL · 111 KB
- 00_setup_0.4n_0.2mm_PLA_MK3S_6h20m.gcode GCODE · 10,3 MB
- 01_wheels_0.4n_0.2mm_PLA_MK3S_37m.gcode GCODE · 2,1 MB
- 02_chassis_0.4n_0.2mm_PLA_MK3S_1h7m.gcode GCODE · 1,6 MB
- 03_front_0.4n_0.2mm_PLA_MK3S_57m.gcode GCODE · 836 KB
- 05_body_0.4n_0.2mm_PLA_MK3S_2h24m.gcode GCODE · 4,0 MB
- 07_seat_0.4n_0.2mm_PLA_MK3S_51m.gcode GCODE · 1,7 MB
- Categoría
- Juguetes y juegos
- Formatos
- STL, GCODE
- Descargas
- 9,424
- Publicado
Sobre este modelo
Simple model(1:18) kit card of Golf GTI mk1 with twin headlights. It's not a completely accurate model, it's more of a puzzle. The recommended material for printing this model is PET-G, but it is not a condition. Good adhesion to the bed is a must for correct printing. Bend the parts carefully! Not all PLAs are suitable for bending. Individual files included. You can print the model without the frame, with variety of colors. Dimensions of the card is 173x173mm , can be printed on MINI machines. Printer setup: Nozzle diameter 0,4 Layer height 0.20 10% infill No supports
Descripción original del autor, publicada en Printables.
