Saltar al contenido
Centro3D
Menú
Gamesir X5S extender — modelo 3D

Gamesir X5S extender

por Erdym en Printables

GameSir X5S extender remix, increasing maximum device length from 213mm to 260mm for larger tablet compatibility.

Descargar gratis Ver en Printables

Todos los archivos (1) en un ZIP

Licencia

Uso comercial permitido

CC BY 4.0 — Atribución

Puedes imprimirlo, modificarlo y venderlo dando crédito al autor.

Al descargar aceptas respetar la licencia y dar crédito a Erdym.

Archivos (1)
Categoría
Juguetes y juegos
Formatos
STL
Descargas
0
Publicado

Sobre este modelo

GameSir X5S Extender – Up to 260mm This is a modified version of the original GameSir X5 Lite Extender, redesigned to fit the GameSir X5S telescopic controller. The GameSir X5S normally supports devices up to approximately 213mm in length. With this modification, the maximum extension can be increased to approximately 260mm, making it possible to use larger tablets. 🔧 What's Different in This Remix? The original model was designed specifically for the X5 Lite. While the X5S uses a similar sliding mechanism, the original extender does not fit properly without modifications. To improve compatibility with the X5S, I've made the following changes: - Hollowed-out design: Modified the internal structure to accommodate the X5S sliding mechanism.

- Adjusted dimensions: Slightly rescaled the original model for improved compatibility.

- X5S compatibility: Adapted the extender specifically for the GameSir X5S.

The goal was to make the original design usable with the X5S while preserving its functionality. 🛠 Installation Instructions The installation process is identical to the original X5 Lite extender. Please refer to the original model's description for detailed disassembly and installation instructions. Original model: https://makerworld.com/tr/models/1721286-gamesir-x5-lite-extender#profileId-1827083 ⚠ Important: - Installation requires disassembling and physically modifying the controller.

- Some original plastic components must be removed.

- The extender must be secured using adhesive.

- Do not extend the controller beyond approximately 260mm, as the internal ribbon cable may be damaged.

- Be careful when handling the ribbon cable and springs during installation.

⚠ Disclaimer This modification is performed entirely at your own risk. Disassembling or modifying your controller may void its warranty or cause permanent damage. I am not responsible for any damage resulting from installation or use. ❤ Credits All credit for the original extender design and installation method goes to the original creator. This is simply a community remix adapted for the GameSir X5S. Huge thanks to the original designer for making the project available! If you find this remix useful, feel free to leave a rating or share your experience.

Descripción original del autor, publicada en Printables.

Más de Juguetes y juegos

Ver todo