Frog Clicker | Kawaii Desk Fidget Clicker
A chubby kawaii frog whose head is the key of a real clicky MX keyboard switch: press the head, it sinks 4 mm and clicks. Two printed parts in four colours, or two colours.
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Revisa las condicionesPERSONAL USE ONLY LICENSE
El autor usa su propia licencia. Revisa sus condiciones en la página original antes de compartir, modificar o vender.
Al descargar aceptas respetar la licencia y dar crédito a Crafter D.
Archivos (3)
- Frog Clicker - 2 couleurs.3mf 3MF · 5,5 MB
- Frog Clicker - 4 couleurs.3mf 3MF · 6,1 MB
- Frog Clicker - Assembly guide.pdf PDF
- Categoría
- Juguetes y juegos
- Formatos
- 3MF, PDF
- Descargas
- 15
- Publicado
Sobre este modelo
A chubby kawaii frog whose head is the key of a real clicky MX keyboard switch: press the head, it sinks 4 mm and clicks. Two printed parts in four colours, or two colours.
Dimensions (assembled) Width: 56 mm Depth: 44.5 mm Height: 39.6 mm
Parts to print (2) - Body × 1 (2 colours) - Head × 1 (4 colours)
You also need - 1 × Clicky MX switch (e.g. Kailh Box White or Gateron Blue)
Print settings Material: PLA Nozzle: 0.4 mm Layer height: 0.2 mm Walls: 2 Infill: 15 % grid Supports: None
Assembly 1. Clear any stringing from the square switch hole. 2. Press a clicky MX switch into the body until its clips snap. 3. Push the head onto the switch stem.
A printable assembly guide (PDF) is attached to the model files.
Descripción original del autor, publicada en Thangs.
