FREE Turkey Spinner Pencil Topper, No Supports

FREE download! A plump, cheerful little turkey with a big three-row fan tail of red, orange and brown feathers, shingled feather scales, textured wings, a little orange beak, a red wattle, rosy cheeks, big black eyes and three-toed orange feet. Push it onto a standard pencil and it spins a full 360 degrees on a built-in captive spinner, the same print-in-place spinner as our football and baseball toppers. It prints in one go with no supports and no assembly.

Size: 54 x 30 x 37 mm. About 14.1 g of filament plus purge for the color changes. Print at 100% scale, because scaling changes the pencil fit and the spinner gap.

Files included - turkey_pencil_topper_multicolor.3mf (colors and settings already set up, ready to slice) - turkey_BROWN_slot1_body_head_wings_inner_tail_spinner.stl (body, head, wings, inner tail row and spinner) - turkey_RED_slot2_outer_tail_wattle_cheeks.stl (outer tail row, wattle and cheeks) - turkey_ORANGE_slot3_middle_tail_beak_feet.stl (middle tail row, beak and feet) - turkey_BLACK_slot4_eyes.stl (eyes) - turkey_single_color_all_in_one.stl (one-color version)

Slot colors: Slot 1 Brown (body, head, wings, inner tail row and spinner). Slot 2 Red (outer tail row, wattle and cheeks). Slot 3 Orange (middle tail row, beak and feet). Slot 4 Black (eyes).

Printing from the STLs? Import the four color files together as one object with multiple parts, then set Brown to Slot 1, Red to Slot 2, Orange to Slot 3 and Black to Slot 4. The spinner is inside the Slot 1 file. Keep the model exactly as it is (no rotating or scaling), with supports and brim off.

After printing, give the spinner in the bottom a little turn so it moves freely, then push the unsharpened end of a standard pencil in and spin it.

Free for personal use. Please don't sell prints of this file. Selling rights come with All Access on Patreon.

Small parts: not for children under 3.

Part of the free Wild & Wiggly Thanksgiving set The pilgrim hat, pumpkin pie slice and acorn spinner pencil toppers are free too. Grab all four for your Thanksgiving table.

More Wild & Wiggly spinner pencil toppers are coming soon to Patreon. Follow along and join here: https://www.patreon.com/cw/Wildandwiggly

PRINT SETTINGS Printer: Anycubic Kobra S1 + ACE Pro (any multicolor printer works) Nozzle: 0.4 mm Scale: 100% Orientation: as in the 3MF, upright on its flat bottom with the spinner opening on the bed Layer height: 0.12 mm Walls: 3 Infill: 15% gyroid (the 3MF drops everything from 22 mm up to 8% infill and 2 walls so the top stays light) Supports: none (they would fuse the spinner) Brim: none (it would fuse the spinner opening) Prime tower: on Filament: PLA, about 14.1 g plus purge. Slot 1 Brown (body, head, wings, inner tail row and spinner). Slot 2 Red (outer tail row, wattle and cheeks). Slot 3 Orange (middle tail row, beak and feet). Slot 4 Black (eyes) Print time: about 31 hours (Anycubic Slicer Next estimate, normal mode, including color changes)