Flexi Spider (Articulated)

ℹTips for printing: - Filament: PLA (only use PLA) - Supports: No - Layer height: 0.16mm (optimal) (0.2mm also works) - Wall loops: 3 - Infill: 15% - Seam position: back - Wall generator: - - Detect thin walls: - - Brim: No - Info‼: Do not scale the spider any smaller otherwise the connections will no longer work! - Info‼: If you apply too much force to the legs they may break because the connections are very small! - Info‼: Please be careful when removing the spider from the print bed!

------------------------------------------------------ ❌‼Disclaimer‼❌ These files are provided for personal, non-commercial use only! This model is not suitable for young children or pets! Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use. ------------------------------------------------------ Colors and filament I used (3 Color Version): - PLA / Black - for the body and legs - PLA / Dark Brown - for the body and legs - PLA / Red - for the eyes

Or decide for yourself which colors and how many you want to use! ℹWhen you decide to print my multicolor Pre-Sliced (3mf file) for BambuLab I would recommend printing several models at once, not just one, to reduce waste!