Flesh and Blood - Chunky Stackable Gold Coin Token

# Flesh and Blood TCG - Chunky Stackable Gold Coin Token (with 16mm Dice Socket) A heavyweight, casino-grade **Gold Coin Token** designed for Flesh and Blood TCG (perfect for Olympia, Silver Age play, and resource tracking). Engineered specifically for clean two-color printing on a **0.2 mm nozzle** with **NO AMS required** via a single manual layer pause. ### Key Features * **Chunky 4.55 mm Casino-Chip Profile:** Sized at 44.4 mm in diameter and 4.55 mm tall for a heavy, satisfying feel when clinking on the playmat. * **Non-Slip Interlocking Stacking:** Features a self-supporting 45° internal V-groove on the base and a matching tapered V-ridge on the black rim. Stacks self-center and will not slide off each other when bumped. * **Instant Stack Counting:** The 3.0 mm Yellow base and 1.0 mm Black top create high-contrast two-tone stripes along the edge so you and your opponent can count gold stacks from across the table. * **16 mm Dice Cradle:** The center holds a standard 16 mm d6 with finger-access cutouts, framed by a sunken Royal Doubloon crown and bullion diamond inlay. * **Official Rules Text on Circumference:** * Top Arc: `TOKEN • GOLD • ITEM` * Bottom Arc: `{a}, {r}{r}, DESTROY: DRAW 1, GO AGAIN` * Text is widely spaced to avoid overlapping strokes.

### Recommended Print Settings | Setting | Value | Notes | | :--- | :--- | :--- | | **Nozzle Size** | **0.2 mm** (Required) | Necessary to resolve the 1.65 mm circumference text cleanly. | | **Layer Height** | **0.10 mm** | Set **both** Layer Height and Initial Layer Height to `0.10 mm`. | | **Wall Generator** | **Arachne** | Min wall width: 75% (prevents missing text serifs). | | **Wall Loops** | **4** | Adds physical weight and structural rigidity to the coin. | | **Infill** | **25%–30%** (Gyroid or Grid) | Prevents top surface pillowing and adds solid heft. | | **Supports / Brim** | **None** | Bottom V-groove is 45° self-supporting; outer edge is 100% vertical. | | **Ironing** | **Top surfaces only** (Optional) | Flow 12%, Speed 25 mm/s for a mirror-smooth finish. | ### Two-Color Manual Swap (No AMS Needed) 1. Slice the provided `.3mf` project or insert a manual pause at **Layer 31 (3.10 mm)** in Bambu Studio. 2. Start the print with **Yellow PLA** (Layers 1–30 / 0.0 mm to 3.0 mm). 3. When the printer pauses at **Layer 31 (3.10 mm)**, use the A1 touchscreen to **Unload Yellow**, feed in **Black PLA**, tap **Load**, and clean the purge waste. 4. Press **Resume**. Layers 31–45 (outer bezel, V-locking ridge, 16 mm dice turret, crown art, and text) will finish in Black.