Dice Tray V2 for Contemporary Dice Tower/Storage
por RAD3D en Printables
Updated Dice Tray to go along with Contemporary Dice Tower/Storage v2 by dePrintinator
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a RAD3D.
Archivos (1)
- Categoría
- Juguetes y juegos
- Formatos
- STL
- Descargas
- 1,357
- Publicado
Sobre este modelo
This is an updated of a model I made to go along Contemporary Dice Tower/Storage by dePrintinator. If you don't have his model already you should check it out. It's a nice design. ** This is just the tray, the tower it was designed for can be found here: Contemporary Dice Tower/Storage v2 by dePrintinator | Download free STL model | Printables.com Based on feedback, I made a few adjustements. The main differences in this Dice Tray update are: - The walls are 1.5mm vs 1mm in the old model. - The tower sits lower to keep dice from bouncing out of the tray. - The fit of the tower is very snug now. Perhaps too snug for most printers. The old version was way too lose.
** If you have trouble printing things with tight tolerances, you should consider printing it at 101% or more.
Descripción original del autor, publicada en Printables.
