D20 Slot Machine Dice Tower

Step up your tabletop gaming experience with the D20 Slot Machine Dice Tower! This unique 3D model combines the thrill of a classic slot machine with the functionality of a dice tower. With its eye-catching design and practicality, it's the perfect addition to any gaming session. Did I also mention it has a storage compartment for your dice? Neat-o! Print Settings: - Body- 0.2 layer height - 3 walls - 10% Infill - Bridging enabled - No brim - No supports

- Spring, Key, Arm, Blocker, D20, Lid- 0.2 layer height - 3 walls - 25% Infill - No supports

- Key, D20- 0.2 layer height - 3 walls - 25% Infill - No supports - Scale if tolerances are too loose or too tight

Assembly Instructions: - Print one of each part - Insert Key into Blocker (It should hold with friction, use Super Glue if needed)-

- Insert Blocker into the side of the Body with the Key facing outward.-

- Insert Blocker all the way and turn clockwise so the key is now vertical. -

- Slide the Spring onto the Key and fit the Spring into the slot. (Spring should have slight tension)-

- Press the D20 onto the end of the Lever. (It should hold with friction, use Super Glue if needed)-

- Press the Lever onto the end of the Key so the Lever is Pointed up. (It should hold with friction, use Super Glue if needed)