Cute Christmas Penguin

ℹ Tips for printing: - Filament: PLA

- Supports: No!

- Layer height: 0.12(0.10)mm or 0.16(0.15)mm or 0.2mm

- Wall loops: 3

- Infill: 15%

- Seam position: back

- Wall generator: Classic

- Detect thin walls: No!

- Brim: No

- BuildPlate: -

- Info‼: The Penguin can be scaled smaller or taller!

------------------------------------------------------ ❌‼Disclaimer‼❌ These files are provided for personal, non-commercial use only! This model is not suitable for young children or pets! Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use. ------------------------------------------------------ Colors and filament I used (4 Colors): - PLA Basic / Orange

- PLA Matte / Red

- PLA Basic / White

- PLA Basic / Black

Or decide for yourself which colors and how many you want to use! ℹ This model is very filament wasteful please keep that in mind! When you decide to print my multicolor Pre-Sliced (3mf file) I would recommend printing several models at once, not just one, to reduce waste! ------------------------------------------------------ ℹ New multicolor version (3mf)! This model is no longer pre-painted in the slicer – you can now freely choose which color goes where directly in your slicer for a better look and easier handling! (Quick tip: identical colors next to each other won’t work – always place different colors side by side to avoid potential issues.)