![Collapsible Dice-Tower (Original) [Easy print version out on my profile!] — modelo 3D](https://r2.centro3d.com/m/2830ca431fa4360ff0d8f87b/1280.webp)
Collapsible Dice-Tower (Original) [Easy print version out on my profile!]
por Adam Wedin en Thingiverse
This is a collapsible Dice-tower, my own design. I would recommend printing it in PLA with supports, preferably using a supportmaterial or petg for the support contact surface. Also make sure that no supports is being printed inbetween the the walls! Only straight under them! You can do this by for.
Licencia
Uso comercial permitidoCC BY-SA 4.0 — Atribución, compartir igual
Puedes usarlo y modificarlo dando crédito; las versiones modificadas deben compartirse con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Adam Wedin.
Archivos (2)
- Categoría
- Juguetes y juegos
- Formatos
- STL, 3MF
- Descargas
- 752
- Publicado
Sobre este modelo
This is a collapsible Dice-tower, my own design. I would recommend printing it in PLA with supports, preferably using a supportmaterial or petg for the support contact surface. Also make sure that no supports is being printed inbetween the the walls! Only straight under them! You can do this by for example setting the support threshold angle to 45+, I have designed some of the parts to be printed at a 45 degree angle so to not need any supports. EASY PRINT VERSION ON MY PROFILE Feedback is appreciated
Descripción original del autor, publicada en Thingiverse.
