Chess Set Detailed
Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5474536.
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Revisa las condicionesLICENSE
El autor usa su propia licencia. Revisa sus condiciones en la página original antes de compartir, modificar o vender.
Al descargar aceptas respetar la licencia y dar crédito a Tobias R.
Archivos (11)
- Beam_letters.stl STL · 49 KB
- Beam_numbers.stl STL · 55 KB
- Beam_simple.stl STL · 10 KB
- Bishop1.stl STL · 2,6 MB
- Chess_Feet_G.stl STL · 1,5 MB
- Feld.stl STL · 1 KB
- King1.stl STL · 3,4 MB
- Knight2.stl STL · 28,4 MB
- Pawn1.stl STL · 672 KB
- Queen1.stl STL · 1,0 MB
- Rook1.stl STL · 2,1 MB
- Categoría
- Juguetes y juegos
- Formatos
- STL
- Descargas
- 61
- Publicado
Sobre este modelo
Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5474536.
Detailed Chess Set Can be assembled and disassembled
The only piece that needs support is the knight I recommend printing the Squares in bundles of eight standing on their edges. That enables you to remove them easier and print them without support. It also creates a nice looking texture on the surface due to the layerlines. When you arrange the squares that the different colors are disaligned in a 90° (π/2 rad) angle you get different reflection behaviors for the two colors.
If you use the feet you will need a 200mmx200mm plate of any material to hold the squares. I used a acrylic glass plate to keep it transparent but you can use even cardboard. You can get acrylic glass plates in this size online for around 3$
Filament:
-Fillamentum PLA Crystal Clear Iceland Blue
-Fiberlogy Easy PLA Beige
The frame has large tolerances for uneeven printed squares
https://www.instagram.com/p/ChKDiUTt09C/
Descripción original del autor, publicada en Thangs.
