Blank Man V12 - Action Figure (Kit Card)

Blank Man V12 - Action Figure (Kit Card Edition) "Fast print, full articulation, and maxed-out elbow and knee bend!" The Blank Man evolution continues with V12—now redesigned into a compact, single-plate Kit Card! Engineered for maximum print efficiency and extreme poseability, V12 features upgraded dual-pivot elbow (like Dummy 13) and knee joints that achieve a full range of motion from completely straight to fully folded. Print the entire card in roughly 1 hour 15 minutes, snap the parts off the sprue, and build your fully articulated pocket-sized robot! PDF Assembly Guide Included A comprehensive 2-page visual PDF guide is attached with step-by-step instructions and photos to guide you through the clip and limb orientation process! Step-by-Step Assembly Summary

- Remove Parts: Snip or twist all parts carefully from the sprue runner frame.

- Prep Clips & Limbs: Separate the ball joint limbs and clips, then press a clip into each ball joint limb housing.

- Upper Assembly: Attach upper limb parts onto each clip assembly and snap them into the torso sides (check orientation as shown in the PDF).

- Lower Assembly: Clip hips into the main body, attach remaining lower limb assemblies, and snap on the hands and feet.

- Head Mount: Press the head block down onto the neck ball joint to finish the build!

Features

- Kit Card Format: All components are laid out flat on a single runner card—ideal for quick printing, gifting, or mailer cards.

- 180° Dual-Pivot Joints: Upgraded knee and elbow mechanics allow a full range of motion from fully open to completely closed.

- Quick ~1 Hour 15 Min Print: Minimal material usage and fast print time on Bambu Lab printers.

- Visual Instructions PDF: Includes clear step-by-step PDF instructions for quick assembly.

- High-Friction Balance: Effortlessly holds high-action stances, crouches, breakdancing poses, and superhero landings!

- 100% Support-Free: Optimized flat-lay geometry engineered for clean printing straight off the bed.