Better Together Pigs, Magnetic Duo (San Valentine)

~Better Together Series 💘 The Better Together series keeps growing with this adorable duo of love-struck piggies 🐷💖

All animals in the collection are fully compatible and can be mixed & matched freely. Magnets are optional, but highly recommended for the wow effect, watch the two halves magically attract and snap together ✨🧲

~🧲 Magnets (optional but recommended) - Magnets are optional… but highly recommended for the full _wow_ effect 💖 - Inside the 3MF files you’ll find pre-made magnet slots (we used round D8×2 mm magnets). - Pause for magnet insertion: layer 27 when printing at 0.16 mm layer height (already set in the 3MFs) or 4.36 mm absolute height - Using a different magnet size? No problem! Resize the slots directly in your slicer (we recommend +0.5 mm tolerance compared to the magnet size).

~🔑 Keychain (optional) - Available with or without the keychain hole - We used 2.4 mm ringball keychains, easy to find and very common - Also compatible with standard classic keyrings (≈8 mm diameter)

General recommendations ⚠️ - Before diving into the multi-color print, we highly recommend starting with a single-color test print to ensure everything works as expected. - For multi-color prints, we suggest filling the bed to minimize PLA waste from color changes.

Files available 📂 - Optimized 3MF files for BambuLab, Creality, Anycubic and Elegoo for an effortless print experience! - STL files for all printers

_We believe in true love, especially when it's 3d printed_❤️✨

Commercial License 💰 Do you want to sell prints of our models? You can purchase commercial licensing by joining the Commercial License in our Patreon (https://www.patreon.com/ValeriaMomo), Thangs3D (https://thangs.com/designer/Valeria%20Momo%20%26%20Mattia) or MyMiniFactory (https://www.myminifactory.com/users/ValeriaMomo-Mattia3D#/) and unlock the opportunity to share this design with your customers!

Cheers, Valeria & Mattia