Articulated Skeleton Crocodile

ℹ The teeth are a bit sharp, so please be careful! As you’ve probably noticed, the head can be attached, please be cautious when snapping the head on to avoid injury! ℹ Tips for printing: - Filament: PLA

- Supports: No!

- Layer height: 0.16(0.15)mm or 0.2mm

- Wall loops: 3

- Infill: 15%

- Seam position: back

- Wall generator: -

- Detect thin walls: -

- Brim: No!

- BuildPlate: Smooth (Textured Build Plates not recommended!) Use a build plate that you know has good adhesion!

- Info‼: Do not scale the Crocodile any smaller otherwise the connections will no longer work!

- Info‼: If you apply too much force to the connections they may break because the connections are small!

- Info‼: Please be careful when removing the Crocodile from the print bed!

- Info‼: Print as oriented!

------------------------------------------------------ ❌‼Disclaimer‼❌ These files are provided for personal, non-commercial use only! This model is not suitable for young children or pets! Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use. ------------------------------------------------------ Colors and filament I used (1 Color): - PLA Matte / BoneWhite

Or decide for yourself which colors and how many you want to use!