Articulated Minecraft Creeper: Print-In-Place

Articulated Minecraft Creeper: Print-In-Place - From the best-selling video game Minecraft. - Print-In-Place and fully articulated. - Optional face pieces included. - Designed in Fusion 360. - UPDATE 3/28/2024:- Fixed model orientation. - Made Head stronger. - Default Head rotation +90 deg for single extruder filament swap for new extruded face option (FACE_EXT ver). - Modified how built-in supports work, this should allow for easier removal (NO_SUP ver). - Added a version that needs support for a better overhang on the upper legs (SUP ver).

Printing: - NOTE: This model was designed with a .4mm nozzle in mind, other sizes may not work. - Printed at .2mm layer height with 20% gyroid infill. - DO NOT repair the model, as doing so will remove the custom supports, causing the legs to print fully in mid-air. - FOR Creeper_NO_SUP and Creeper_NO_SUP_FACE_EXT- Supports are not required, this version will have worse overhangs. - DO NOT repair the model; doing so will remove the custom supports, causing the legs to print fully in mid-air. - Turn off Detect Overhang Walls.

- FOR Creeper_SUP and Creeper_SUP_FACE_EXT- Print using supports.- Only needed under floating legs, paint-fill overhang. - Tree and Snug work well.

Clean Up: - After printing, the head and legs should snap apart, allowing them to rotate freely.- Be careful not to apply too much pressure when releasing the joints.

- You can also print the optional Creeper face and use super glue to adhere the pieces.

Design Iterations