Articulated Hammerhead Shark 2.0

Dimensions (LxWxH) 150 x 74,86 x 51,67 mm (100% scale) Basic information The original Articulated Hammerhead Shark gets an update! Thanks to its more stylized and exaggerated appearance, it's even cuter and more eye catching than the original Hammerhead design. And it's available in multicolor too! Included files You can choose from 5 files: 4 .stl files, and one .3mf multicolor project file for PrusaSlicer. The files are sorted into 2 folders, singlecolor and multicolor. The multicolor files are optimized for printers with an automatic multi-material system, or a toolchanger. To prevent any issues, please avoid printing the multicolor files separately. This design is a part of the Articulated Sea Life collection by me. You can check out other designs from this collection here. The Articulated Sea Life collection is a live project, and I'm continuously adding new designs, anytime I get an interesting idea, or a suggestion. The designs are also updated, if any changes or tweaks have to be made. Feedback, suggestions and ideas are welcome! Material PLA Layer height 0,2 mm Infill >10% Support None. The model was designed not to require any support material. Scaling The model should come out perfectly functional even at lower scales. Tested up to 60% of the original scale. Results may vary depending on the accuracy of your setup and quality of the materials used. Orientation Default, laid flat on the belly Adhesion aid Not necessary, contact area with the buildplate should be sufficient. If your print surface suffers from poor adhesion, consider using an adhesive spray, or an other kind of adhesion booster. Using a brim is possible, but not recommended, as it would be difficult, and inconvenient to remove afterwards. All resolved past issues with the model files and detailed information about their fixes will be listed in this section. If you're having any problems which aren't on this list, please visit the Known issues section below. If you don't see your problem mentioned there as well, please leave us a message with more details, so that we're able to address it as soon as possible.

11/30/2024 - Fixed a non-functioning link in the model description

12/21/2024 - Merged the singlecolor and multicolor versions, which were previously listed as two separate models. Now all the files can be found on the same model page for better clarity. - Retired two of the three original singlecolor versions, and only kept the most popular one. The two retired versions can be found in the “Legacy files” folder. - Updated the image gallery. - Added .3mf files for PrusaSlicer. - Changed the file naming system for added convenience and clarity. - Minor changes to the model description.

There currently aren't any known issues/work in progress. If you run into any, please contact me via dm. My work is free for personal, non commercial use. If you want to sell, or monetize my models in any other way, please visit my Patreon for more licensing options.