Among Us - Dead or Alive

THANK YOU - Tim, Michael, Vit, Christian, Joseph, Joe, Christopher, Courtney, Melinda, Paige and JM for the generous tip! Please consider donating for coffee. Thanks! https://www.paypal.com/paypalme/alpokemon Here's my version of a character from Among Us. Separated for easy printing into colored parts and then joined together. For magnet build get 4x2mm magnets - https://www.amazon.com/Magnets-Refrigertor-Whiteboard-Durable-Multi-Use/dp/B07D1QV61T/ref=sr_1_2?dchild=1&keywords=4mm+x+2mm+magnets&qid=1600999642&sr=8-2 Please consider donating for coffee. Thanks! https://www.paypal.com/paypalme/alpokemon Update: Sept 17, 20 - Updated with new Easy_Visor heads so you can more easily snap the visor into place. If you still can't a little super glue will do. Sept 13,20 - Added new head and legs that are keyed so they join together more nicely when displayed whole.. Up to you on which version you want to print. If you have 4 - 6mm wide magnets, you can put them in the files with _M. They have cut outs for 2 magnets. Just make sure your polarity is correct before gluing them in. NOTE>b> For the visor, the top of the visor on the head acts like a lip. You wedge it in there and then push hard to get the lower edge of the visor into the lower edge of the cutout. It basically "snaps" in and you don't need glue. I will make a version where the lip is less strong so you can just glue it in. Enjoy! No, I didn't see him get murdered with that axe. Model is 70mm tall.