75mm Snowflake ornament clay or cookie cutter

75mm clay cutter

Boost MePlease consider given a boost or rating if you like my models. This helps to keep designs free. Thankyou

Print settings 0.4 Nozzle 0.16mm layer 2 walls 15% infill but for best results I do often print with 100% infill Wall generator 'Arachne

Need a Mirrored model? try this

- Select the model and right‑click.

- Choose Mirror from the menu.

- Pick the axis you want to mirror: - X → flips left/right (best option for clay cutters)

- Y → flips front/back

- Z → flips top/bottom

Need to increase the cutter height? Try this

Make the cutter taller or shorter without changing the outline.

- Select the model and go to Scale at the top of the screen.

- Uncheck “uniform scale.” This lets you adjust one axis independently.

- Change the Z scale %: - Increase Z% → taller cutter

- Decrease Z% → shorter cutter

Need to scale the model? Try this

Be cautious — scaling too much affects wall thickness. Large scaling makes cutters too thick to cut, and small scaling makes them fragile. A safe range is usually within 10%.

- Select the model and go to Scale.

- Check “uniform scale.” This keeps X, Y, and Z locked together.

- Adjust the Scale %, example: - 110% → cutter becomes 10% larger

- 90% → cutter becomes 10% smaller