28mm Modular Bar
por Ryan Beasecker en Thingiverse
NORM! All models are designed to print flat and without supports or rafts. All files have been run though NetFabb. I printed these in PLA at a resolution of .1mm. I found a good deal of inspiration from Talismancer's bar: http://www.thingiverse.com/thing:1194408 Each individual section of the bar...
Licencia
Solo uso personalCC BY-NC 4.0 — Atribución, no comercial
Puedes imprimirlo y modificarlo para uso personal dando crédito. No se permite vender las impresiones.
Al descargar aceptas respetar la licencia y dar crédito a Ryan Beasecker.
Archivos (20)
- Bar_22.5_Top_C.stl STL
- Bar_45_Top_L.stl STL
- Bar_45_Top_R.stl STL
- Bar_22.5_Top_R.stl STL
- Bar_45_Bottom_RL.stl STL
- Bar_22.5_Top_L.stl STL
- Bar_1_Bottom.stl STL
- Bar_22.5_Bottom_C.stl STL
- Bar_45_Front_RL.stl STL
- Bar_2_Bottom.stl STL
- Bar_2_Top.stl STL
- Bar_1_Front.stl STL
- Bar_3_Bottom.stl STL
- Bar_3_Front.stl STL
- Bar_2_Front.stl STL
- Bar_22.5_Bottom_RL.stl STL
- Bar_1_Top.stl STL
- Bar_22.5_Front_C.stl STL
- Bar_22.5_Front_RL.stl STL
- Bar_3_Top.stl STL
- Categoría
- Juguetes y juegos
- Formatos
- STL
- Descargas
- 39,519
- Publicado
Sobre este modelo
NORM! All models are designed to print flat and without supports or rafts. All files have been run though NetFabb. I printed these in PLA at a resolution of .1mm. I found a good deal of inspiration from Talismancer's bar: http://www.thingiverse.com/thing:1194408 Each individual section of the bar has 3 files. A Bottom, a Top, and a Front. The parts with a 1, 2 or 3 indicate a straight section of either 1", 2", or 3" in length. Parts with a 22.5 or 45 indicate the angled sections, 22.5 degrees or 45 degrees. Part with a R, L, or C indicate either Right side, Left side, or Center sections. A part with 'RL' means it can be used for either the right side or left side. Enjoy!
Descripción original del autor, publicada en Thingiverse.
