Zotac Zbox Magnus One AIO Mod
por Nachiket M en Thangs
The two Split Side Panel parts are optional.
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Revisa las condicionesLICENSE
El autor usa su propia licencia. Revisa sus condiciones en la página original antes de compartir, modificar o vender.
Al descargar aceptas respetar la licencia y dar crédito a Nachiket M.
Archivos (9)
- Channel Bottom.stl STL · 117 KB
- Channel Front.stl STL · 98 KB
- Channel Top.stl STL · 57 KB
- Covering Plate.stl STL · 65 KB
- Radiator Clamp.stl STL · 75 KB
- Radiator Mount.stl STL · 163 KB
- Side Panel Complete.stl STL · 312 KB
- Split Side Panel Left.stl STL · 218 KB
- Split Side Panel Right.stl STL · 131 KB
- Categoría
- Repuestos
- Formatos
- STL
- Descargas
- 103
- Publicado
Sobre este modelo
The two Split Side Panel parts are optional.
Please visit the blog post (https://onsitego.com/blog/zotac-magnus-one-performance-mod-heres-how-to-improve-it-with-liquid-cooling-3d-printing/) for comprehensive 3D printing and assembly instructions.
Recommended slicer settings: - Nozzle Size: 0.4mm - Wall/Line Width: 0.4mm - Perimeter/Wall Count: 4 - Layer Height: 0.2mm - Top Layers: 6 - Bottom Layers: 6 - Infill Density: 40% - Brim: Yes - Supports: No (with the exception of radiator clamp, which requires supports)
Tools and hardware required: - 3D printer, or access to 3D printing service - 3D printing filament (ABS or PETG Recommended) - Ball-end hex driver for blind screws - Soldering iron with B2 (Conical) tip - Flush cutters - M4x12mm SHCS (5 Units) - M3x10mm SHCS (5 Units) - M3x10mm BHCS (6 Units) - M3x8mm FHCS (2 Units) - M4 heat set inserts (5 Units) - M3 heat set inserts (13 Units)
Descripción original del autor, publicada en Thangs.
