Wobbler 2 Fishing Lure 100mm (3 different lips)
por Dominik Lutzenberger en MyMiniFactory
Wobbler with 3 different lips. Print it standing up with a big brim and some support on the back for stabilisation. Drop 1 4.5mm BB into the big air chamber. It will roll to the back while casting and to the front while retrieving.
MyMiniFactory entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalCC BY-NC-ND 4.0 — Atribución, no comercial, sin derivadas
Solo para uso personal, sin modificarlo y dando crédito. No se permite vender ni redistribuir cambios.
Al descargar aceptas respetar la licencia y dar crédito a Dominik Lutzenberger.
Archivos (3)
- Big Lip.stl STL
- Narrow Lip.stl STL
- Small Lip.stl STL
- Categoría
- Varios
- Formatos
- STL
- Descargas
- 927
- Publicado
Sobre este modelo
Wobbler with 3 different lips. Print it standing up with a big brim and some support on the back for stabilisation. Drop 1 4.5mm BB into the big air chamber. It will roll to the back while casting and to the front while retrieving.
For the assembling you need 0.8mm stainless spring steel wire, 2-3 split rings, hooks and 5mm eyes.
-The small lip version runs about 1-2 feet deep and has a wobbling action.
-The big lip version runs about 3-4 feet deep and has a wobbling action.
-The narrow lip version runs about 2-3 feet deep and has more of a rolling action.
PRINT WITH 100% INFILL and don´t forget the BB!
Descripción original del autor, publicada en MyMiniFactory.
