WMP1M - WiiMote Pistol V1.1 Modded

WMP1M - WiiMote Pistol V1.1 Modded - The Nintendo Fan With The Golden Gun

As a follow up to the previous post, here I am going crazy with a modded version. Like the original, you only need the body and trigger parts for it to function, but where's the fun in that?

The body now has a mag slot, a front screw connection for a suppressor/muzzlebrake and a screw connection in the base of the grip for a stock. The top covers are a choice between a slightly thicker sensible version and the unhinged version with the accessory rail and a need for something like a pencil to press the buttons. There is a another trigger choice and three mag sizes, the middle version is what you can see in the photos. Also the stock shown in the pictures requires printing on a 200x200mm bed diagonally (and is a little short) but the longer version requires printing on a 250x250mm bed diagonally. Unfortunately, 150x150mm bed users are limited as the body and stocks are too long.

The trigger and the top covers are compatible with WMP1 version 1.0

Obviously, these parts are just for looks and don't affect the Wiimote in use but something to consider is that if you screw something to the front you will need to place your sensor bar above your display so as not to block it.

Print the body (mag slot & grip down, like WMP1), and print the mags and stocks stood up as they would be attached to the pistol. The muzzle brakes should be printed face down/screw up, the triggers on their side and the top covers upside down (control cut-out down).

This was enjoyable to do, I have designs for another modded version to work on.

Any questions, please just ask.

--PATREON & PATREON SHOP. --https://www.patreon.com/3DFreeman

Thanks for your continued support!