Wizard Hat Ghost Storage Box with Removable Lid

A ghost-shaped storage box with sculpted hands, fabric folds and a face, topped by a bent wizard-hat lid with raised stars and a hat band. Three internal compartments hold small accessories or wrapped treats. Dimensions and storage layout can also be adjusted on the model page: https://boxesmodel.com/models/halloween-wizard-ghost-box Overall width with preserved proportions, compartment layout, divider height, inward wall thickening, floor elevation and lid clearance can be adjusted. The files here are the complete fixed default-size version. Custom exports follow the pricing shown on the model page. DEFAULT SIZE AND ASSEMBLY 173.2 x 170.35 x 210.87 mm overall including hands and hat. Circular opening: approximately 92 mm; divider height: 94.6 mm; nominal lid clearance: 0.30 mm per side. Print one ghost body and one hat lid. Clean the locating rim and lower the hat vertically onto the mouth. No purchased hardware is needed. Review the hands, hem, hat brim and underside for supports. This is not a sealed container. Dimensions are in millimetres. Each STEP is an alternative CAD format for the matching STL, not an extra piece to print. PRINT STATUS AND COLORS Geometry, dimensions and part completeness were checked in CAD. This model has not been sliced or physically test-printed. Review orientation, supports and tolerances in your slicer. No tested print profile, print time or G-code is supplied. The cover is a render of the actual model, not a photograph. STL and STEP contain uncolored geometry; illustrated colors require painting or slicer coloring. No AMS/MMU-ready multicolor 3MF is included. Food-contact performance has not been validated; use wrapped sweets if storing treats. CREDITS AND LICENSE Created for boxesmodel with AI-assisted parametric CAD development. © 2026 boxesmodel. CC BY-NC-ND 4.0: https://creativecommons.org/licenses/by-nc-nd/4.0/ Personal noncommercial printing is permitted under the license. Credit boxesmodel with source and license links when sharing the original files. Do not distribute modified versions; the linked license contains the full terms.