Wire Splice Vise - holds two wires in line for soldering (100% printed)
por DELLOO2008 en Printables
Two sliding mini vises on a dovetail rail hold two wires perfectly in line, so both hands are free for soldering.
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a DELLOO2008.
- Categoría
- Herramientas
- Formatos
- STEP, 3MF
- Descargas
- 32
- Publicado
Sobre este modelo
Drop each wire into a vise from the top and turn the knob. Slide the vises together until the stripped ends overlap, lock them with the knob on top, and solder. Both vises sit on the same rail at the same height, so the wires always line up. - Holds wires from about 0.5 to 6 mm thick
- V-grooves in both jaws centre the wire
- Each vise slides on a dovetail rail and locks in place with a thumb screw
- Strip-length scale on the front (0 in the middle, every 5 mm)
- Four pegs to park heat-shrink tubing (3, 4.5, 6 and 8 mm)
- Recesses for stick-on rubber feet (optional)
- Printed nuts drop into slots in the vises, no metal hardware needed
Not tested yet - designed and checked in CAD (all threads and parts checked for fit and clearance).
Descripción original del autor, publicada en Printables.
