Wicked Witch's Hat Wall Mounted Display / LED Backlit Accent Piece

Bring a magical Halloween glow to your wall with this wall-mounted LED witch's hat display! Featuring a classic crooked witch's hat complete with buckle detail and flame-like cutaways, this wall accent casts an eerie silhouette day or night. To give you complete flexibility for mounting and custom lighting setups: - Lithophane Dual-Glow Effect (V2): Features an ultra-thin 0.0314″ (0.8mm) face layer. When the LEDs are switched on, brilliant light passes directly through the open cutouts while scattering a soft, ambient glow across the rest of the display surface!

- Flush Keyhole Wall Mounting: The required backplate features a built-in keyhole slot designed for #3 screws, allowing the entire piece to mount completely flush against your wall.

- Plexiglas Halo Backlighting Option: For an ultra-clean halo lighting effect against your wall, swap the printable backplate for a matching piece of Plexiglas cut to the same shape and screwed onto the back using the pre-modeled mounting holes!

Originally conceptualized as a custom woodworking project, this model has been fully adapted for 3D printing with precise tolerances, hidden wire routing, and customizable lighting options. Print it as a standalone desk accent, or use it as a physical template guide for scroll saw or router woodworking! Be sure to explore the rest of my lighting collection here: Illuminated Silhouette Collection Key Features: - Lithophane Dual-Glow Effect: The ultra-thin 0.0314″ layer allows light to beam brightly through cutaways while diffusing a warm glow across the face of the hat.

- Flush Keyhole Wall Mounting: Features a built-in keyhole slot on the rear plate designed specifically for #3 screws to ensure a completely flush wall fit.

- Versatile LED Backlighting: Built with a hollowed-out rear cavity to easily route and conceal LED light strips.

- Rear Diffuser / Light Shield: Includes an backplate that fastens with standard hardware using pre-modeled mounting holes to direct light forward and shield wiring.

- Plexiglas Halo Backplate Option: Can be paired with a custom-cut Plexiglas backplate to scatter an ambient halo glow onto the surrounding wall.

- Woodworker & Hybrid Friendly: Functions as a physical template guide if you prefer cutting real wood for a hybrid build!

Dimensions - Width: 9″

- Height: 8.5″

- Thickness: 0.375″

Print Settings - Material: PLA or PETG

- Layer Height: 0.12mm to 0.20mm (0.12mm recommended for optimal lithophane translucency)

- Infill: 20%+ (Gyroid or Grid)

- Orientation: Print flat face down on the build plate for a smooth surface finish.

- Supports: None required

Looking for a tabletop base edition instead? Check out my companion listing here: