Water Tank Splatter Shield for Gaggia Classic / Pro / Evo
por Loogle en Printables
Full-width shield to keep splatter/debris from entering the water tank. Reduces grime and slows biofilm buildup.
Licencia
Solo uso personalCC BY-NC 4.0 — Atribución, no comercial
Puedes imprimirlo y modificarlo para uso personal dando crédito. No se permite vender las impresiones.
Al descargar aceptas respetar la licencia y dar crédito a Loogle.
Archivos (4)
- Categoría
- Hogar
- Formatos
- STL, STEP
- Descargas
- 1,381
- Publicado
Sobre este modelo
This is a simple shield to prevent dust, debris, coffee splatter, etc. from entering the Gaggia Classic / Pro / Evo water tank. As a result, the water stays fresher for longer and biofilm takes longer to build up. There are 3 variants. Most people should be fine with the standard TankShield (7 mm coverage) but with some combinations of tank and housing you may want to use the Tall (7.8 mm) or Short (6.2 mm) file variants. Print Instructions: PETG tested, PLA should be fine. 0.4 mm nozzle, 2 wall lines, 0.2 mm layer thickness. Print per file orientation:
Updates: - 2024-01-23: found some tanks have a burr on the top lip. This can be shaved off with a razor blade for an ideal fit, but I also changed the design slightly to accommodate a wider range of thicknesses.
Descripción original del autor, publicada en Printables.
