Wall-Mounted Toilet Cleaning Sheet Dispenser for 7x11 cm Sheets

Toilet cleaning sheets tend to live in their box under the sink, behind everything else. This puts them on the wall next to the loo, where you'll actually reach for one.

It's a slim box, 90 mm deep, that slides onto a plate you screw or stick to the wall once. Load it from the top, put the lid on, and the sheets come out one at a time from a slot at the bottom front, so there's no fishing around in a box with rubber gloves on. A gate inside stops the second sheet following the first, and you set its height once with a little tab on the front.

There's a tear sleeve on one side for when half a sheet will do a quick once-over, and a narrow window on the front with a refill line so you can see when it's getting low.

It's built around Filthy Clean toilet cleaning sheets, which are 7 x 11 cm and come 40 to a box. Laundry and dishwasher sheets the same size fit too.

Printing it Five parts: shell, wall plate, lid, gate and slider. The slider's tab has eight notches (0.4 to 2.0 mm gap); try notch 5 first. PETG recommended. 0.2 mm layers, 3 walls, 15% infill. No supports. Each part fits a 180 x 180 mm bed. Mounting: 2 countersunk 4 mm screws or adhesive strips (or 6 disc magnets, 12 x 3 mm, on a steel surface). Footprint on the wall 138 x 89 mm. Holds up to 80 sheets.

We haven't test-printed it yet, so a make photo would be very welcome.

Designed by Filthy Clean. Creative Commons Attribution 4.0. The Filthy Clean name and logo aren't part of the licence.