Wall Mounted Filament Holder
por Connor M en MyMiniFactory
Spool holder for mounting on a wall. One of my printers is tight in a corner and it has a side-fed extruder so I needed a spot above it to hold the filament. I made it large enough to fit 3KG spools as well as the more typical 1KG spools. Uses wood screws (#8 to mount and #6 screws to assemble). 3/4
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Connor M.
Archivos (4)
- Categoría
- Herramientas
- Formatos
- STL
- Descargas
- 465
- Publicado
Sobre este modelo
Spool holder for mounting on a wall. One of my printers is tight in a corner and it has a side-fed extruder so I needed a spot above it to hold the filament. I made it large enough to fit 3KG spools as well as the more typical 1KG spools. Uses wood screws (#8 to mount and #6 screws to assemble). 3/4" PVC pipe is used for the spool axel. The spigots are super glued into the ends of the PVC pipe. Included is a spigot for 12 mm OD pipe, as I have a couple of odd spools with very small center holes.
Descripción original del autor, publicada en MyMiniFactory.
