Voron 2.4 Filament Latch (or any 2020 extrusion)
por Richard M en Printables
Easy print clip for 2020 extrusions for panels or doors, whatever you want to hold really.
Licencia
Uso comercial permitidoPuedes usarlo, modificarlo y venderlo; si distribuyes versiones modificadas deben ir con la misma licencia y sus fuentes.
Al descargar aceptas respetar la licencia y dar crédito a Richard M.
Archivos (12)
- NewLatch-3.0mm.stl STL · 1,6 MB
- NewLatch-3.5mm.stl STL · 1,6 MB
- NewLatch-4.0mm.stl STL · 1,6 MB
- NewLatch-4.5mm.stl STL · 1,6 MB
- NewLatch-5.0mm.stl STL · 1,6 MB
- NewLatch-5.5mm.stl STL · 1,6 MB
- NewLatch-6.0mm.stl STL · 1,5 MB
- NewLatch-6.5mm.stl STL · 1,5 MB
- NewLatch-7.0mm.stl STL · 1,5 MB
- NewLatch-7.5mm.stl STL · 1,5 MB
- NewLatch-8.0mm.stl STL · 1,5 MB
- NewLatch-8.5mm.stl STL · 1,5 MB
- Categoría
- Para tu impresora
- Formatos
- STL
- Descargas
- 22,284
- Publicado
Sobre este modelo
Printable quick release latch for panels on 2020 extrusion This is originally inspired by a youtube video - https://www.youtube.com/watch?v=6p7M18oPn3k A recent review video on YouTube by Maple Leaf Makers Another user did a review of the clips on YouTube - Best way to mount panels to your 3D Printer? Quick Release Panel Clip Mod So why did you do it? - I wanted a variant with filament hinges - I found it didn't put quite enough pressure on the panel and my attempts to modify the cad failed - Decided the best way to understand it was to design it - Wanted adjustable "pressure" and thought using a sweep on the latch was a nice solution making the most of the flex of ABS - Wanted everything as a parameter so I could tune it - Build plate density, a bonus of using a filament hinge is that the area used for each hinge is much smaller
45 instances on a 250 buildplate Hardware - 3.0mm-5.5mm - m3x12 - 6.0mm-8.0mm - m3x16 - 8.5mm - m2x20
The process - Cad attempt one failed, just modified surfaces to create a filament variant but adjustment beyond that failed - Cad attempt two failed, created a traced version copying the dimensions but again couldn't get a reliable adjustment - Cad attempt three of the cad sketch made as built was finally onto something, took until v45 before I had something that seemed to fulfil my requirements, then after thinking overnight revisited earlier designs and finally hit RC at v68 (18 actually printed) - Final design and thankfully discovered sheeter (now defunct sadly) which allows me to produce many stls based on parameters
Assembly voron-parts/Assembly.gif at main · richardjm/voron-parts (github.com) - Print parts (do test prints to ensure you're happy with the fit before going wild) - Assemble to correct orientation - Insert two short filament lengths connecting middle hinge to hinge body, one from each side - Insert one long filament length connecting middle hinge to outer hinge - The filaments are a tight-ish fit on the hinge arms but loose in the pivot intentionally - Connect to frame using with hammer nut or spring loaded nut with either m3x12 or mx16 depending on size of hinge printed
Descripción original del autor, publicada en Printables.
